FTP avec Caja (Mint)
$ sudo apt-get install curlftpfs
On crée le dossier dans lequel on va monter notre FTP
$ mkdir /home/patjennings/ftp
Et on se connecte comme cela
curlftpfs username:password@ftp_adress mount_folder
$ curlftpfs username:firstname.lastname@example.org /home/patjennings/ftp
La connexion est disponible au point de montage spécifié
Pour déconnecter, s’aider de
$ fusermount -u /home/patjennings/ftp
FTP in terminal
- From > http://www.tldp.org/HOWTO/FTP-3.html
- Voir aussi > http://www.dummies.com/how-to/content/how-to-use-ftp-from-terminal-to-transfer-mac-files.html
3. Beginner’s guide to using ftp
A quick guide to using ftp.
The standard ftp program is the original ftp client. It comes standard with most Linux distributions. It first appeared in 4.2BSD, which was developed by the University of California, Berkeley.
3.1 Running the
It’s easy to use ftp. Let’s say you want to connect to the anonymous ftp site metalab.unc.edu, to download the latest Linux kernel source.
At the command line, type:
$ ftp http://metalab.unc.edu
The ftp program will attempt to connect to
metalab.unc.edu. Another way to do this is to run
ftp from the command line with no parameters, and use the
with the site name as an argument:
$ ftp ftp> open http://metalab.unc.edu
3.2 Logging into an FTP server
When you connect to an FTP site, it will ask you for a login (pressing enter
will log in as your local user name, in this case,
foo: We log in as
ftp, to get to the public archive.
220 (http://helios.oit.unc.edu FTP server (Versionwu-2.6.0(2) Wed Nov 17 14:44:12 EST 1999) ready). Name (metalab.unc.edu:foo):
Now, we enter a complete e-mail address as the password (this is what most public FTP sites request).
331 Guest login ok, send your complete e-mail address as password. Password:
After a successful login, the following information is given to us:
Remote system type is UNIX. Using binary mode to transfer files. ftp>
3.3 File transfer types
After you log in to an ftp site,
ftp will print out the file transfer type.
In our case, it is binary. Binary mode transfers the files, bit by bit, as
they are on the FTP server. Ascii mode, however, will download the text
directly. You can type
binary to switch between the types.
You want to download the kernel source, so you leave the file transfer type at binary. The binary type is also what you would use for any non-text files – such as graphic images, zip/gzip archives, executable programs, etc. If in doubt, use binary mode.
3.4 Navigating and listing directories
You do an
ls to see a list of the files. The
ls command on ftp servers is
executed on the remote server, so the command line options that you can use
with it vary from server to server. The most common options are generally
available, check the manpage for
ls for details.
ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for /bin/ls. total 33590 -r--r--r-- 1 root other 34348506 Dec 03 03:53 IAFA-LISTINGS lrwxrwxrwx 1 root other 7 Jul 15 1997 README -> WELCOME -rw-r--r-- 1 root other 890 Nov 15 13:11 WELCOME dr-xr-xr-x 2 root other 512 Jul 15 1997 bin dr-xr-xr-x 2 root other 512 Jul 15 1997 dev dr-xr-xr-x 2 root other 512 Jul 18 1997 etc drwxrwxrwx 11 ftp 20 4608 Nov 28 16:00 incoming lrwxrwxrwx 1 root other 13 Jun 04 1998 ls-lR -> IAFA-LISTINGS dr-xr-xr-x 17 root root 512 Jun 08 11:43 pub dr-xr-xr-x 3 root other 512 Jul 15 1997 unc dr-xr-xr-x 5 root other 512 Jul 15 1997 usr 226 Transfer complete.
ls command lists so many files that they scroll off the top of the
screen, you can use Shift-PageUp to scroll up. This works in Linux console
mode as well as in xterm or rxvt.
On public FTP archives, the downloadable resources are usually held in the
/pub directory. In this example, you already know that the kernel sources
are in the directory
/pub/Linux/kernel, so you type the following to get
into that directory:
ftp> cd pub/Linux/kernel 250-README for kernel 250- 250-What you will find here: kernel sources and patches 250- 250- 250 CWD command successful.
The messages you see, which begin with “250”, are information messages sent by the server. In this case, the ftp server is configured to automatically send you the README file when you cd into the directory.
3.5 Downloading and uploading files
Now, after doing another
ls, you see that you want to
cd into the v2.2
directory. You do yet another
ls, and find the file you want to download. It
linux-2.2.13.tar.gz. So you type this:
ftp> get linux-2.2.13.tar.gz local: linux-2.2.13.tar.gz remote: linux-2.2.13.tar.gz 200 PORT command successful. 150 Opening BINARY mode data connection for linux-2.2.13.tar.gz (15079540 bytes).
The ftp program has started saving the remote file
the local file
If you wanted to save it as the local file
foo.tar.gz, you could have
specified it like this:
ftp> get linux-2.2.13.tar.gz foo.tar.gz local: foo.tar.gz remote: linux-2.2.13.tar.gz 200 PORT command successful. 150 Opening BINARY mode data connection for linux-2.2.13.tar.gz (15079540 bytes).
If you want to download more than one file at a time, you’ll have to use the
mget (multiple get) command. You can use
mget together with a space-
delimited list of filenames you want to download, or you can use wildcards
mget command. For example:
ftp> mget linux*
Would get all files starting with the string “linux”. Normally,
prompt you for each file before it downloads it. You can toggle this by using
Now let’s say you’ve written a piece of software, and you want to upload it to MetaLab to be included in their Linux software archive. First, you’d change to the /incoming directory (most public FTP servers have a directory, usually called incoming or uploads, where files can be uploaded), then you’d use the put command:
ftp> cd /incoming ftp> put foo.tar.gz local: foo.tar.gz remote: foo.tar.gz 200 PORT command successful. 150 Opening BINARY mode data connection for foo.tar.gz. 226 Transfer complete. 10257 bytes sent in 0.00316 secs (3.2e+03 Kbytes/sec)
put command works the same way as the
get command, so you can use
mput to upload multiple files at the same time. You can also upload a local
file with a different filename on the server by specifying the remote filename
and/or pathname as an argument.
What if the file
foo.tar.gz is not in your current local directory when you
try to upload it? You can switch local directories by using the
change directory) command:
ftp> lcd /home/foo/
Local directory now /home/foo
3.6 Running shell commands
The ftp client supports using the bang (!) to run local commands. For example, to get a listing of files in your current local directory, do this:
The way this works is that ftp calls the shell (specified in the
environment variable), and it is the shell which runs
ls. Thus, you can run
any command-line which works with your shell simply by prepending “!” to it
(the default shell in most Linux distributions is bash, the Bourne Again
SHell). Please note that
!cd does not work as you would expect, this is why
lcd command exists.
3.7 Hash marks and tick
Wouldn’t it be nice if you could watch the progress while you’re downloading a file with ftp? You can use the hash command to print out hash marks as you download a file:
ftp> hash Hash mark printing on (1024 bytes/hash mark).
As you can tell, ftp will print a hash mark for every 1024 bytes of data you download.
There is also a
Tick counter printing on (10240 bytes/tick increment). This will print something to this effect as you download a file: Bytes transferred: 11680
3.8 Other ftp commands
There are many other ftp commands. If you have the permissions to do so (which
you should, if you are connected to your own private shell account), you can
make a directory on the remote server using the
mkdircommand. You can remove
a file on the remote server using the
delete command, or
rmdir to remove a
directory. You can also change file permissions using the
For more elaborate information on using ftp, please see the online help in the
ftp program (accessible by typing help with no arguments for a list of
commands, or help